PM Series Air Driven Liquid Pump:

The PM series of mini liquid pumps are single acting, single 80mm air drive units that are capable of pressures in excess of 11,000 PSI / 800 BAR. The ProTech Pump model number reflects the pumps nominal pressure ratio , while the technical data indicates exact ratios. The outlet stall pressure is easy to set by adjusting the air drive pressure and by simply multiplying the pressure ratio by the air drive pressure, the nominal liquid pressure can be calculated.

ProTech Air Driven Liquid Pump PM Series side view

Features:

  • Stainless steel wet end materials of construction
  • Specialised construction materials available
  • Polyurethane pressure seals as standard
  • UHMWPE, PTFE & other special seals available
  • Separation & drainage between hydraulic & pneumatic seals
  • No airline lubrication required
  • Compact and lightweight
  • Suitable for most hazardous areas
  • Available as a complete packaged system (ProPak) here

PM SERIES PUMP RANGE

Model No.Actual RatioDisplacement per StrokeMax Outlet PressureConnection Size Inlet/OutletPriceAvailability
PM2225:10.37 cu in / 6.03 cc2,900 psi / 224 BARG0.375" NPT / 0.375" NPT$621.00 ex taxStocked item
3662100
PM4045:10.20 cu in / 3.35 cc4,460 psi / 360 BARG0.375" NPT / 0.375" NPT$633.00 ex taxStocked item
3663300
PM6064:10.14 cu in / 2.36 cc7,424 psi / 512 BARG0.375" NPT / 0.375" NPT$639.00 ex taxStocked item
3663900
PM100100:10.09 cu in / 1.51 cc11,600 psi / 800 BARG0.375" NPT / 0.375" NPT$644.00 ex taxStocked item
3664400
PM910:10.92 cu in / 15.08 cc1,160 psi / 80 BARG0.375" NPT / 0.375" NPT$656.00 ex taxStocked item
3665600
PM1516:10.58 cu in / 9.43 cc1,856 psi / 128 BARG0.375" NPT / 0.375" NPT$656.00 ex taxAssembled to order
3665600